The pump-out vacuum and adaptor are especially effective in emergency situations when vacuuming up liquid spills, leaks, for flood control and swimming pool maintenance. The P42010SMP has the same features of our poly wet vacuums and the SMP-1 adaptor fits an existing vacuum or drum adaptor.
- Recovery System
Liquids are recovered in the tank and continuously pumped out.
- P42010SMP Includes
1.3 HP Motor Head; 50 Ft 12/3 Power Cord w/Ground Fault Interrupter;
20 Gallon Poly Tank w/Build-In;
Pump and Barbed Connector;
15 Ft Intake Hose and 50 Ft Discharge Hose; 5 Ft Metal Wand; Mesh Filter Bag; 16" Squeegee; 12" Gulper Tool
- SMP-1 Adaptor
Designed to fit P415 and P420 poly or #15 and #20 steel wet/dry vacuums or drum adaptor.
- SMP-1 - Easy Installation
No special tools or equipment are required, all you need is a tank vacuum or drum adaptor, set up for wet pickup and .75" garden hose or 1.5" vacuum hose.
- SMP-1 Adaptor Includes
Conversion Adaptor w/1.5" Swivel
Swivel Hose Connector
4 Ft Vinyl Hose
Barbed Hose Connector
Support Cord w/Handle
Power cord w/ground fault interrupter
Mesh Filter Bag
|Order No. ||431001 ||307319 |
|Motor ||1.3 HP, 120V || |
|CFM ||94 By-Pass || |
|Waterlift ||84" || |
|Current ||7.5 AMPS || |
|Sound Level ||78 dB || |
|Pump ||60 Hz, 120V ||60 Hz, 120V |
|Pump Waterlift ||44 GPM @ 40 Ft ||28 GPM @ 23 Ft |
|Pump Current ||8.0 AMPS ||8.0 AMPS |
|Tank Capacity ||20 Gallon Poly || |
|Manual & Parts List ||